A: I, too, have seen my share of failed retaining walls. I grew up in hilly Cincinnati, and retaining walls can be found all over the city and in the suburbs.
You may recall that point in high school physics class when a frustrated student demanded, "Give me an example of when I'll ever use this stuff in real life!"
Well, this is one of those times.
Gravity wants to tip over all retaining walls. It’s all part of Mother Nature’s plan to transport rock and soil back into the oceans. Those engineers who design retaining walls that last and last can say they won an arm-wrestling competition with Mother Nature — at least temporarily, as she always bats last.
The problem you face with retaining walls is this: The taller they are, the more weight they’re holding back. It’s very complex. This is why any wall taller than six feet should be designed by an engineer who’s got experience in retaining walls.
Short walls two feet high that you might build in your yard can be done with little fear of failure. But once you get higher than that, things can go wrong fast.
I’ll never forget the first retaining wall I built. It was a 50-foot-long wall that started out one foot high but ended up 42 inches high. I built it in front of another retaining wall and there was just three feet of dirt behind the wall, not a hill.
After five years, I noticed the tall end of the wall seemed to be tilting outward. I had used regular brick, four-inch back-up concrete block and some vertical steel rods in between the brick and the block to try to ensure the wall would not tilt. I lost that arm-wrestling match!
Years later, I discovered the freezing weather contributed to the failure. The soil behind my wall would freeze and expand. Each year, the ice would push the wall out another quarter inch or so. A much thicker wall and pea-gravel fill between the soil and the wall would have prevented the failure.
I have great retaining wall step-by-step tips and videos for you at my website. Go to: go.askthebuilder.com/retainingwall.
Q: I need to patch some cracks in my older blacktop driveway, and I don’t want to do it a second time. Let me state up front I’m no fan of the liquids or black caulks that end up looking worse than the crack itself. Have you figured out a way to patch blacktop cracks and disguise the repair? — Constance M., Springfield, Mass.
A: I agree about the black caulk products and liquid crack fillers. They look like a facial scar to me. You may not pay much attention to aged blacktop, but what you’re really seeing are tens of thousands of small rocks that have lost their jet-black coating of liquid asphalt.
Just last week I patched quite a few cracks in my own aged blacktop driveway. I've perfected a method of doing it so you simply can't see the crack repair, even if you stand 10 feet away.
I start by cleaning out the crack of all debris. If the crack is wide enough, I use my battery-powered demolition hammer with a three-quarter-inch wide bit. I chisel the sides of the crack so the bottom of the crack is wider than the top. The profile resembles a dovetail carpentry joint or the shape of the hole in a tooth just before a dentist fills a cavity.
I make sure the crack depth is at least one inch before squirting in a magic epoxy I discovered about six years ago. It comes in caulking tubes and has a magic nozzle that mixes the two components that come out of the tube.
I keep the epoxy about one-eighth inch below the top of the blacktop and then begin to press into the fresh epoxy small stones that match the ones in the blacktop. You’ll find these all along the edge of your driveway. I embed stones as small as one-eighth inch into the epoxy all in a random pattern as you see in the blacktop. The last step is to scatter dry sand onto any visible epoxy and tamp it with my finger. Hours later, you can sweep away the excess sand.
I’ve got step-by-step photos of this magic blacktop crack-filling process and a link to the epoxy I’ve tested at my website waiting for you. Go to: go.askthebuilder.com/crackrepair.
Tim Carter can call you on the phone for free to solve your problem. Go to his website and fill out the form on this page: https://www.askthebuilder.com/ask-tim/.