A few weeks ago a visitor to my AsktheBuilder.com site wanted to know about brick foundations.

Karen has an ambitious desire to build a small 900-square-foot house by herself. She is well aware of her physical limitations and asked me if it was possible for her to construct the foundation using standard brick. She had tried to lift an 8-by-8-by-16-inch concrete block and discovered those were too heavy. She feels she could handle brick. Karen asked me what she needs to know to build a strong brick foundation.

From time to time you’ll hear me say, “You don’t know what you don’t know.” When you apply this to your life experience about all things building, it’s easy to fall into a trap where you feel there are just one or two ways to do something.

Take house foundations for example. You may live in a part of the country where the building contractors use concrete or precast concrete block. If you don’t travel at all or do research about foundation types, you might come to the conclusion there are just two ways to build a foundation.

But travel to other parts of the United States or the world, and you’ll quickly discover that there are quite a few other ways to build foundations that last generations. Each time I go into town to get groceries, I pass at least five old houses that have stacked stone foundations with no mortar between the stones! The builder just filled the gaps between stones with smaller stones. Most of these houses were built in the mid-1800s, and they look to me as good as the day they were built.

In Ashland, N.H., the restored railroad train station, built around the 1860s, sits on top of a distinctive brick foundation. The foundation dates from 1891, when the station was moved about 100 feet.

The train depot foundation is in fantastic shape to this day with no signs whatsoever of structural cracks or failure. It could use a little tuckpointing, but that is a minor repair. Karen’s dream is going to come true!

It is important to realize not all bricks are the same. Different varieties can have different hardness depending on the length of time the bricks are in the kiln and what the firing temperature is. You can make bricks so hard and durable that they are suitable for paving in streets. Just visit Athens, Ohio, to see their wonderful brick streets that have survived heavy trucks and brutal winters for decades.

Karen should use a nice strong brick. I told her to go to the Brick Industry Association (BIA) website and download “Specifications for and Classification of Brick,” one of the series of Technical Notes on Brick Construction that the BIA publishes. This simple-to-read-and-understand free document shares the best brick to use in a structural situation such as her foundation. She should use a brick that is rated for severe weathering.

I then shared with Karen that she should look at the entire list of free Technical Notes PDFs offered by the BIA. They contain a wealth of information about how to install brick of all types.

You should do the same if you are planning on building a brick-veneer home. A vast majority of brick-veneer homes here in the United States, based on my observations, are not built correctly. Homeowners routinely complain of water leaks. The BIA knows how to capture and control water that gets through brick and mortar.

One of the things I recommended to Karen was the use of steel in her brick walls. You can buy affordable pieces of reinforcing steel that add enormous strength to brick walls. This fabric comes in different widths and is made using two parallel pieces of thin wire that is just about an inch less in width than the brick wall. In between the two pieces of wire is more wire that looks like a continuous strip of the capital letter W with the tips of the letters touching one another.

This steel is only about 1/16-inch thick, and you lay it directly on top of a course of brick. You then put the mortar for the next row on the wire just as you would a course without the steel. The BIA Technical Notes talk about the spacing, but I told Karen to do it every eight inches for extra strength.

The thickness of the brick foundation walls is important. If the foundation walls are over six feet, personally I’d have the walls 12 inches thick. You only get one chance to get this right. If the walls are long, every 12 feet I’d put in a brick buttress that’s eight inches thick and is two feet long. Cathedral builders in Europe hundreds of years ago discovered the benefits of buttresses. They’re easy to install, and they add enormous strength to the walls, preventing them from failing.

The last piece of advice I gave Karen was to build a short experimental wall so she gets comfortable laying brick. It’s not that hard to do. It just requires the three Ds: diligence, determination and discipline. You can do it, too! I’d love for you to send me photos of any brick wall you decide to build.

Subscribe to Tim’s’ free newsletter and listen to his new podcasts. Go to: AsktheBuilder.com.

Read more in Real Estate: