The Washington PostDemocracy Dies in Darkness

Mixing brick and rock may create an attractive home exterior

Here’’s a unique and tasteful use of brick and rock on the exterior of a house. (Tim Carter)

My husband and I are in a small skirmish about the brick veneer home we are building. I want it to be somewhat distinctive, incorporating random pieces of rock in the brick. Among other claims, he says this will weaken the brick and cause leaks. Is this true? He’s also worried that it will cause our home to be worth less money when we go to resell it. Can you offer any advice that will allow me to have the home I want and satisfy my husband at the same time? Have you seen houses like this, and what would you do?Saraj C., Santa Rosa, Calif.

I think you’ll be able to have the house you want — and we’ll calm down your husband at the same time. Some inspirational examples should help him get over his mental barriers.

Let’s address the structural concern first. First and foremost, the brick on your new home is not structural. It’s just an outer skin that has nothing to do with holding up the roof. The brick veneer wall rests on the poured concrete foundation, and it’s supposed to be connected to the wood frame walls using heavy-duty galvanized corrugated pieces of metal that are securely fastened to the wood wall studs. This is done so the brick doesn’t tip and fall to the ground.

The pieces of stone or rock will not weaken the brick. In fact, depending on the type you choose, the rocks may be stronger than the brick. A good example is granite, which may have far greater compressive and tensile strength.

How to repair a chipped ceramic tile

Incorporating stone will not cause leaks. Water seeps through the mortar joints in between each brick and runs down the back of the brick veneer. Your builder needs to know how to keep this water from contacting the wood framing and redirect it to the outside of the wall.

Now for the aesthetic concerns. I was lucky and grew up in a distinctive older suburb of Cincinnati called Clifton. The northern parts of this suburb had a few houses in which brick and stone were blended together in a random pattern. The look was stunning. As a young boy, every time I rode my bicycle up and down the sidewalks of this area, these houses would catch my eye.

I’ll never forget my first time walking past the majestic Tribune Tower in downtown Chicago. This stately skyscraper has 149 pieces of rock, brick and stone embedded in the oolitic limestone that was used to build the structure. These pieces of stone come from all over the world, some from very historic sites such as the Great Wall of China, the Alamo and the Berlin Wall.

How to properly install house wrap

Imagine what you could do. You live in California, one of the most geologically diverse states in the United States. You could have a boatload of fun going out and collecting different rocks from around the state and using these to mimic what was done at the Tribune Tower, albeit on a smaller scale.

Mixing different colors and rock textures could create a gorgeous look. What’s more, collecting the rocks would make for great trips and memories. As a college-trained geologist myself, I think this could be a great way to do something that helps you discover more about all the wonders that surround you.

As for hurting the value of your home, I may have to concede a point to your husband. Not all potential buyers would like the look you’re going for. A seasoned realty agent or appraiser would no doubt tell you the same.

A granny pod can add value to your home if done right

But there’s a way around this and it’s very easy to do. All you need to do is order a few hundred extra of the bricks that are being used to build your home. These would be easy to store in your garage or in your yard. You’ll also want to save about 20 or more five-gallon buckets of the exact sand the bricklayers use to build your home.

Having the brick and sand on hand will allow you to tell a future buyer they can remove the pieces of stone and install the matching brick in their place if they desire. To ensure the patches look perfect, you need to use the exact same sand as was used when the brick was first installed.

Be sure to save at least one empty mortar bag so a future mason knows what to buy. I always coach people to save things like this down by the electrical circuit panel. Put the bag in a resealable plastic bag and mark on the outside of the bag what it is — and also put in big letters: DO NOT DISCARD. Tape this bag above the electrical panel for a future homeowner.

Need an answer? All of Tim’s past columns are archived for free at www.AsktheBuilder.com. You can also watch hundreds of videos, download Quick Start Guides and more.

Loading...