Congratulations on your new home! As you’re discovering, there are many decisions you need to make. It’s best to make all the decisions before you even go out to bid, but few new homeowners are that disciplined. When all decisions are made in the planning stage, the bids you get back from the builders are much easier to compare.
The best way to answer your question is to share a few stories about my personal experience with both types of foundations. I was lucky enough to live in a part of the United States where both poured concrete and concrete block were in use. What’s more, there were tens of thousands of homes that had stone foundations, and almost all of these were in excellent shape after 100 years. Therein lies a clue to help you.
I grew up and had my business in Cincinnati. Interbedded limestone and shale made up the bedrock geology of the area. Early settlers could harvest wonderful pieces of durable stone from the hillsides along the Ohio River and the nearby tributaries. This stone was easy to shape and just the right thickness to use for building foundations for homes and large buildings.
The masons stacked the stone and used a lime mortar to hold the stone together. This same method of construction was adopted by masons who would later use manufactured concrete block. The difference between the stone and block is that stone is solid all the way through. The concrete block has void spaces to make them lighter and easier to lay in a wall.
Poured concrete started to be used in the early 1900s in the Midwest in both residential and commercial construction. The only thing that limited the final shape of the foundation was the design of the wood forms that held the wet, plastic concrete that was placed in them. With enough labor on the construction site, builders could form and pour a new foundation in as little as two days.
Concrete block didn’t require any forms to be built. A block foundation contractor that had enough masons and hod carriers could complete a large foundation in one day. It was a revolutionary building material.
All that said, what all builders, masons, architects and homeowners discovered is that both poured concrete and concrete block could crack and fail unless they were properly designed and constructed. The secret ingredient was steel. Concrete and concrete block have enormous strength when you squeeze or compress them, but if you attempt to bend or stretch either, they usually only have one-tenth of their strength when compressed.
Soil pushing against a foundation wall causes them to bend, as can soft soil under a foundation. This is why reinforcing steel rods placed at precise locations in poured concrete footers are so important. This same steel needs to be placed in the poured concrete or block walls if you want to prevent cracked walls that bow inward. Believe me, I’ve seen both poured concrete and concrete block wall failures where no steel was used. The cost to fix them is extraordinary.
Reinforcing steel can also be placed in concrete block foundations. Vertical steel bars can extend upward from the poured footer and be woven into the voids of the concrete block. Thin reinforcing steel that resembles a bar joist you often see in a large warehouse ceiling just under the roof can be placed in the horizontal rows of concrete block.
You can build a concrete block foundation that’s stronger and more durable than a poured wall as long as the block foundation has lots of vertical and horizontal steel in it and the void spaces in the concrete block wall are filled with pea-gravel concrete. I make this statement assuming the same exact poured foundation has no steel in it.
Recently, I saw a foundation footer being installed that had no reinforcing steel. So don’t think for a moment that all footers and poured walls have this all-important steel.
The other issue is the cost of labor in your area. To build a stronger concrete block foundation as I describe is very labor intensive. There are many steps, and each one needs to be done right.
On the other hand, a poured concrete foundation can be formed and poured on the same day. The foundation I mentioned above, which is now sitting on top of the footer that has no steel, was formed and poured in just seven hours. I was out of town on business the day this happened so I can’t tell you if the walls contain the needed steel. I hope so, for the sake of the homeowner.
At the end of the day, I feel your decision will be based on a cost comparison, but both the concrete block and poured walls need to have the mission-critical steel in them and to be designed correctly so you can compare the real cost between the two. Good luck.
Need an answer? All of Tim’s past columns are archived for free at www.AsktheBuilder.com. You can also watch hundreds of videos, download Quick Start Guides and more.